How can you tell the source of noise from a driving scrubber?

When using a floor washer without understanding the working principle of a driving floor washer, even if there is a problem, it will not be easily discovered. However, there are many user reactions. The floor washer has noise when it is in use, that there was something wrong with the machine. Steele industrial washing machine manufacturers small make up here to give everyone to eat a reassurance, for this case, do not panic, need to find out the situation again

Generally speaking, the driving washing machine noise mainly comes from the following three parts: suction motor part, walking motor, brush motor part. There are different manufacturers on the machine motor is not the same, there are permanent magnet brushless motor, and the use of brush motor, brush motor noise itself than the permanent magnet brushless motor noise

If the part of the suction motor noise, usually caused by water into the motor bearing part of the damage, in this case can only replace the suction motor.

If it is a walking motor, the noise generated by the wheel part is usually due to the wheel brake part failure or the wheel winding foreign body caused. In this case, the need to jump brake pads, and in the brake part to add oil. In addition, if the running motor or wheel part is the gearbox fault caused by the noise, the need for maintenance personnel to carry out maintenance.

If the brush motor part of the noise, usually due to foreign body winding or motor gearbox failure, in this case to clean foreign body or find a special maintenance personnel for repair.

On the one hand, the noise of driving a washing machine is produced. Usually use to pay more attention to driving washing machine maintenance, greatly improve the efficiency of the machine and service life.